How to replace a L10 motor - Ozroll L10 motor

How to replace a L10 motor - Ozroll L10 motor

How to replace a L10 motor - Ozroll L10 motor
 
Replacing a L10 motor is very simple, you will need some basic tools and a pop rivet gun.
Parts that you will need: https://rollershuttersaustralia.com.au/collections/frontpage/products/l10-roller-shutter-motor-ozroll-drive-system-ods-l10
Please watch our How to repair / Replace a Ozroll Motor L10 ODS Motor Part # 15.121.000 - ODS Eport
L10 Roller Shutter Motor 15.121.000
Has your old motor stopped? Has a ticking sound? Slow? Maybe it's time for a change?
Australian Made Ozroll Drive System L10 Motor
Replacement motor for the L10 - Easy to install -
Genuine Ozroll motor
1 Year Warranty
Replacement controllers, chargers and wall units available.
L10 Roller Shutter Motor 15.121.000

The ODS L10 motor is a 12V lateral motor which has been specifically designed to work in conjunction with Ozroll’s low voltage DC controllers.

This motor can fit in end plates 165mm and above, making it available for use in shutters when the width is too small for a tubular motor, such as bathroom windows or bay windows. An internal gear works as a down stop for the motor which is set in our factory during assembly. Resistance causes the motor to stop on the way up which is achieved by using stops in the shutter guide. This means there is no limit settings required during installation.

Back to blog